logo

Erweiterte Dokumentation

Einleitung

Dieses Dokument richtet sich in erster Linie an Administratoren. Hier werden Aspekte des Netzwerkbetriebs beleuchtet und mögliche Fehler-Codes des Installationsprogrammes „Setup” erläutert.

Firewall

Das Ziel einer Firewall ist es, die unberechtigte Kommunikation von Programmen mit der Aussenwelt zu verhindern. Leider kann durch zu restriktive Konfiguration der Firewall der Betrieb eines Hardlock-Servers blockiert werden. Um dies zu verhindern, können Sie entweder die gesamte Firewall deaktivieren oder den vom Hardlock-Server verwendeten UDP Port 3047 deblockieren.

Je nach Betriebssystem sind dafür unterschiedliche Schritte notwendig.

Firewall deaktivieren

Ab Windows 7

  1. Drücken Sie die [Windows Logo]-Taste und tippen „wf.msc”, gefolgt von der Eingabetaste.
  2. Wählen Sie im linken Navigationsbaum den Knoten „Windows-Firewall mit erweiterter Sicherheit - Lokaler Computer”.
  3. Wählen Sie im Hauptmenu „Aktion” den Eintrag „Eigenschaften”.
  4. Setzen Sie den „Firewallstatus” auf „Aus” und drücken Sie [OK].

Windows XP

  1. Drücken Sie die [Windows Logo]-Taste und tippen „firewall.cpl”, gefolgt von der Eingabetaste.
  2. Schalten Sie die Firewall aus.

UDP Port 3047 deblockieren

Ab Windows 7

  1. Drücken Sie die [Windows Logo]-Taste und tippen „wf.msc” gefolgt von der Eingabetaste.
  2. Definieren Sie eine neue, eingehende Regel:
    • Wählen Sie „Eingehende Regel” im linken Navigationsbaum bei „Windows-Firewall mit erweiterter Sicherheit - Lokaler Computer”.
    • Wählen Sie im Hauptmenu „Aktion” den Eintrag „neue Regel..”.
    • Als Regeltyp wählen Sie „Port” und drücken [Weiter].
    • Wählen Sie „UDP”, geben Sie bei „Bestimmte lokale Ports” die Zahl „3047” ein und drücken Sie [Weiter].
    • Wählen Sie „Verbindung zulassen” und drücken Sie [Weiter].
    • Geben Sie als Name „Aladdin” ein drücken Sie [Fertig stellen].

Windows XP

  1. Drücken Sie die [Windows Logo]-Taste und tippen „firewall.cpl” gefolgt von der Eingabetaste.
  2. Definieren Sie eine Ausnahmeregel:
    • Wechseln Sie zum Register „Ausnahme”.
    • Drücken Sie [Port addieren].
    • Tippen Sie „Aladdin” als Name, als Portnummer „3047” und wählen Sie „UDP” als Protokoll.
 

„HL-Server”-Dienst & DEP

Datenausführungsverhinderung oder DEP (englisch für Data Execution Prevention) ist eine erweiterte Sicherheitsfunktion von Windows. Falls DEP aktiviert ist, blockiert Windows die Ausführung des „HL-Server”-Dienstes.

Auf 64-Bit Windows-Systemen ist DEP standardmässig aktiviert und Sie müssen für den „HL-Server” eine Ausnahmeregelung konfigurieren:

  1. Öffnen Sie Start › Systemsteuerung › System ›.
  2. Drücken Sie links oben auf „Erweiterte Systemeinstellungen”.
  3. Drücken Sie im Register „Erweitert” unter „Leistung”auf [Einstellungen].
  4. Wechseln Sie ins Register „Datenausführungsverhinderung”
  5. Wählen Sie „Datenausführungsverhinderung... mit Ausnahme der ausgewählten einschalten”.
  6. Drücken Sie [Hinzufügen...].
  7. Navigieren Sie ins Verzeichnis „%WINDIR%\SYSwow64” und öffnen Sie „hls32svc.exe”.
    (im Normalfall: „C:\Windows\SYSwow64\hls32svc.exe”)
  8. Drücken Sie [Übernehmen] und schliessen Sie alle Dialoge mit [OK].
  9. Öffnen Sie die Windows Dienst-Verwaltung und starten Sie den „HL-Server” Dienst.

 

Setup Fehler-Codes

0: sucessfully completed, everything's fine.

3: can not define the uninstall record in the registry

12: can not overwrite a configuration file in the CubusShared folder; most probably, a CFG file is write protected, or you don't have the priviledges to modify this file

13: see 12

15: can not overwrite the main configuration file CUBUS.CFG in the CubusShared folder; most probably, this CFG file is write protected, or you don't have the priviledges to modify this file

16: see 12

20: can not create the start menu

30: a global path on the application server for a Cubus application is undefined or not valid

35: see 15

50: no licence preset on the application server

60: unknown entry in Admin.CFG for the line „PRESELECTEDLICENCES”

100: can not or no more read a ZIP file from the Cubus distribution media

101: invalid CubusShared path; most probably, the main configuration file CUBUS.CFG is missing

102: the installation has first to be configured from the CubusNetworkManager on the application server

103: administrator privileges are necessary for the auto mode

104: the auto mode can only be started on a client, not on the application server

110: the ZIP file read is damaged and can not be properly expanded

120: not enough memory to expand the ZIP files

130: internal error (error calling the ZIP files expanding routine)

140: internal error (no file parameter for the selected ZIP files routine)

150: hard disk is full, the selected ZIP file can not be properly expanded

160: the selected ZIP file is damaged (end of file reached unexpectedly)

180: the requested library XCDUNZ32.DLL (or XCDZIP32.DLL) is used by another process and is therefore not available; stop all running applications, a restart of your system may help

190: the current operation on a ZIP file has been interrupted by the user

201: the license presetting can not be saved

301: internal error (undefined Admin.CFG path)

240: the XCDZIP32.DLL and XCDUNZ32.DLL libraries, requested for the ZIP files expanding routines, are not available

250: internal error (ZIP file operation)

280: temporary folder error during ZIP files expanding

290: error reading the ZIP file

300: error writing ZIP file

302: can not save the Admin.CFG file; most probably, this CFG file is write protected, or you don't have the priviledges to modify this file

303: can not find a Cubus application CFG file

304: can not find the executable file

305: a global path on the application server for a Cubus application is undefined or not valid; check the path in the CubusNetworkManager on the application server

310:  Fehler beim Erzeugen der Dateien und Ordner zum Extrahieren von Dateien aus den ZIP-Dateien. Stellen Sie sicher, dass Sie alle nötigen Rechte haben um Dateien in die Programmordner (inkl. CubusShared-Ordner) zu schreiben und dort auch zusätzliche Unterordner zu erzeugen.

400: can not or no more fully read the selected ZIP file

401: no licence preset on the application server; can be recovered on the application server

501: can not determine the installed hardlock drivers version

510: can not create the requested folders to expand the ZIP files; check the access priviledges

1000-1999:  Windows Fehlermeldung (Offset 1000) beim Erzeugen eines Ordners zum Installieren der Programme. Prüfen Sie, ob Sie während der Installation alle nötigen Rechte haben um in den für die Installation gewählten Ordnern neue Unterordner erstellen zu können.

2000: (xsrFileNotFound) ZIP file corrupted; please contact the Cubus Hotline

2001: (xsrBadVersion) ZIP file corrupted; please contact the Cubus Hotline

2002: (xsrBadCrc) error reading the ZIP file from the Cubus distribution media; please check the integrity of your Cubus distribution media

2003: (xsrUpToDate ) ZIP file corrupted; please contact the Cubus Hotline

2004:  (xsrUnableToOpen): Die angegebene Datei konnte nicht extrahiert werden. Dies kann der Fall sein, wenn die Datei von einem laufenden Programm benutzt oder ausgeführt wird oder wenn ein Virenschutzprogramm gleichzeitig die Datei prüfen will. CubusSetup nochmals starten und prüfen ob die Meldung für dieselbe Datei wieder auftritt.

2006: (xsrBadData) error reading the ZIP file from the Cubus distribution media; please check the integrity of your Cubus distribution media

2007: (xsrOverwrite) ZIP file corrupted; please contact the Cubus Hotline

2005: (xsrBadPassword) ZIP file corrupted; please contact the Cubus Hotline

-100:  Der alte, ungenügende Hardlocktreiber kann nicht entfernt werden.

-101:  Es sind Administratorenrechte nötig um den Hardlocktreiber zu entfernen.

-102:  Es laufen auf der Maschine noch andere Prozesse welche den Hardlocktreiber verwenden. Dieser kann deshalb nicht automatisch entfernt werden.

-103:  Die zur Installation des Hardlocktreibers nötige DLL ist nicht auffindbar oder kann nicht geladen werden (CubusShared\Aladdin\HInstD.DLL).

-151:  Die Schreibrechte einiger Dateien welche der Hardlocktreiber verwendet und welche sich im System befinden (Windows\System32) können nicht geändert werden.

-152:  Einige temporäre Dateien welche der Hardlocktreiber verwendet und welche sich im System befinden (Windows\System32) können nicht gelöscht werden.

-153:  Einige Dateien welche der Hardlocktreiber verwendet und welche sich im System befinden (Windows\System32) können nicht gelöscht werden. A 9 Anhang

-154:  Einige Dateien welche der Hardlocktreiber verwendet und welche sich im System befinden (Windows\System32) können nicht umbenannt werden.

-200: can not install properly the new Hardlock drivers